Inquire Us

The 2000W Powered Loudspeaker delivers uncompromising professional audio for a wide variety of applications, including mobile performing and permanent installations. This active cabinet’s tight, low-frequency reproduction is handled by a 15″ driver with a 3″ high-temperature voice coil. A 1.4″ tweeter with a neodymium magnet and precision waveguide provide crystal-clear high-frequency reproduction. Thanks to its large LF driver and efficient Class-D bi-amplification, the TS315 delivers plenty of low-end punch, making it an ideal choice for DJs, live bands and other performers on the go.

With 1,000 watts of continuous (2,000W peak) Class-D amplification, this 2-way, full-range powered loudspeaker features redesigned transducers in a lightweight, portable enclosure.

Integrated M6 suspension points, built-in pole socket and a wedged cabinet design give you the flexibility to mount the TS312 in a variety of ways. Dual XLR combo mic/line inputs, independent level controls and an XLR link output deliver I/O and setup versatility. Get your sound dialed in perfectly with an onboard 2-channel mixer and contour EQ switch.

Whether you’re using the 2000W Powered Loudspeaker as a monitor or a main, you can count on clean, accurate full-range audio and reliable performance, gig after gig. Thanks to its lightweight, compact design, transporting and setting up this active PA speaker is a snap, so you can save your energy for performing—not hauling heavy equipment.

Output Power:  2000 W peak (1300 LF + 700 HF) 1000 W continuous RMS (650 LF + 350 HF)
LF Driver:  15-inch (381 mm) LF driver, 3-inch (76 mm) high-temperature voice coil
HF Driver:  1.4-inch (35 mm) neodymium magnet HF driver with precision wave guide
Crossover:  2 kHz
Maximum SPL:  134 dB peak, 131 dB continuous (dB SPL @ 1 m)
Frequency Response:  50 – 20 kHz (+/- 3 dB)
Frequency Range:  43 Hz – 22 kHz (-10 dB)
Horn Coverage:  90° H x 60° V nominal
Equalization: Contour Switch Low and High Frequency +3dB Boost
Connectors:  (2) XLR/TRS 1/4” (6.35 mm) combo inputs, (1) XLR link output, (1) IEC power cable input
Controls:  (2) Volume, Power on/off switch, Contour switch, Ground-Lift switch
Indicators:  2 x Power LED (front and rear), Clip limiter LED
Protection:  Electronic clip, Thermal and transducer overdrive protection
Power Connection:  IEC with Mains Fuse
AC Voltage Input:  100,110-120,220–240 V, 50/60 Hz
Enclosure:  Trapezoidal, injection-molded, polypropylene enclosure, with perforated steel grille
Mounting/Installation: 36 mm standard pole mount, Wall or ceiling mount using TSB125 bracket, Flown application with integral M10 suspension points, Wedge monitor
Dimensions:  (H x W x D): 25.7” x 16.6” x 15.4” / 652mm x 421mm x 392mm
Net Weight:  41.3 lbs. / 18.8 kg.
Design Origin:  Designed and tuned in the USA